Why Deer Valley?
Deer Valley Homebuilders understands that purchasing a home is often the biggest decision you’ll ever make. To say that a new home purchase is merely a considerable endeavor and significant investment is an understatement — after all, this is the place you choose to live. At Deer Valley, we never compromise on building materials or quality construction principles. The strength of our materials, the consistency and passion that drives our workmanship, and the commitment to heavy-built, energy efficiency homes, are the driving forces that make Deer Valley a leader in manufactured and modular housing.
Many of these advantages are afforded to us by the very nature of factory-built housing. By constructing our homes in a highly regulated, climate-controlled facility, we can completely mitigate construction delays caused by undesirable weather conditions and minimize any contamination from external sources. Subsequently, our regulated and tightly monitored building processes ensure that your home gets built on time, to spec, and will last for generations.
Furthermore, continual in-plant inspections result in compliance with the most current energy efficiency and construction codes. So at the end of the day, you not only get a home that’s built stronger and more reliable than a site built home, as well as a structure that guarantees a lifetime of efficient and sustainable operation, you save time and money.
Scroll down the page to see exactly what it is that makes Deer Valley a well-renowned builder of quality manufactured and modular homes.
HOMES BUILT TO LAST A LIFETIME
ALL EXTERIOR WALLS ARE 2×6 WITH ENERGY EFFICIENT R19 INSULATION
All series of homes constructed by Deer Valley Homebuilders are built with 2×6’s. This allows more insulation in the sidewalls and much stronger construction. Although this feature may be more expensive, it is undeniably advantageous and comes standard with all Deer Valley series of homes. 2×6 framing as compared to most traditional 2×4 framing is tremendously stronger with much greater load bearing capacity.
Deer Valley Homebuilders frames and constructs each home with #1 and #2 lumber. We do not use #3 lumber or culls. This largely eliminates any potential warping or bowing.
TOP AND BOTTOM PLATES ARE 2×6 AND 2×4
We do not use 1x4s as structural framing members.
DOUBLE 2X STUDDED HEADERS ABOVE DOORS AND WINDOWS
Compare this to single stud design. This measure prevents sagging, contributing to greater structural integrity.
7/16″S TECH SHIELD RADIANT HEAT BARRIER ROOF DECKING
This lessens attic heat by approximately 30 degrees, thereby increasing shingle life and allowing for significant long term energy cost savings. All series of homes constructed by Deer Valley include this significant energy savings feature standard. All Deer Valley manufactured and modular homes are built in a way that reduces energy costs and ensures long term sustainability and efficiency.
2×8 FLOOR JOISTS WITH DOUBLE PERIMETER RAILS
Compare this to single rail construction. If 2×10 floor construction is desired, it is available and often opted.
2×4 INTERIOR WALLS
Compared to 1×4 or 2×3 interior walls
23/32″ OSB FLOOR DECKING (PLYWOOD OPTIONAL)
This can be compared to NovaDeck, Cresdeck, or 5/8ths OSB
OSB WRAP/SHEATING W/ WHOLE HOUSE WRAP MOISTURE BARRIER
Compare to Black Board/Foam Board or a lesser substrate. OSB seams are minimized and covered with full house wrap.
40/40 BREAKER PANEL WITH 12-2 MINIMUM WIRE CIRCUITS
This feature comes standard on al Deer Valley and Sun Valley series of homes.
1/2″ FINISHED SHEETROCK THROUGHOUT THE ENTIRE HOME
Deer Valley goes above and beyond in this regard, compared to the standard of partial finished drywall or vinyl on gypsum. The typical thickness of vinyl on gypsum is 3/8″ or less. Thicker sheetrock is less likely to break or crack and has a greater firewall rating.
SHERWIN WILLIAMS PAINT
Quality paint allows for decor changes over a lifetime. The paint we use is zero VOC (volatile organic compound) Promar 200, which provides superior quality, availability, and safety for your family. Exterior paint for Cement Fiberboard is Sherwin Williams Duracraft. For more info on interior paint, click here. For more info on exterior paint, click here.
HAND LAID 16″ NAFCO FLOOR TILE IN KITCHENS, BATHS, & UTILITY – 20 YEAR WARRANTY
Compare this to roll goods. Tears and floor discolorations are eliminated. The average cost of installed NAFCO Permastone at your local retail floor store will range between $5 and $7 per square foot. The thickness is .125 gauge vs. a typical important that is 0.80 gauge. Deer Valley is proud to offer material that is over 1.5 times as thick. This feature is standard in Deer Valley and Sun Valley Series homes.
DRAWER OVER DOOR CABINET CONSTRUCTION WITH LAZY SUSAN (PER PRINT)
Compared to individual doors and drawer stacks. Metal roller guides are standard vs. plastic.
KITH KCMA CERTIFIED CABINETS
Compare this feature to standard, factory-built cabinets. KITH cabinets have 3/4″ adjustable overhead shelves and a 1/2 shelf in the base cabinet. This allows kitchen storage customization and enables the ability to place large items upright in the front area of the base cabinets. KITH is a professional cabinet maker with state of the art cabinet building facilities and decades of experience. Compare these to non-KCMA certified cabinets built in manufactured housing facilities. Solid wood cabinetry doors and stiles are greatly superior to wrapped MDF (medium density fiberboard) cabinet doors. We offer 5 different cabinet colors in both raised panel and shaker style. Please see your local Deer Valley retail sales center for exact selections available.
DELUXE CROFT LOW EMISSIVITY (LOW E) THERMAL PANE WINDOWS W/ RESIDENTIAL GRID PATTERN (LIFETIME WARRANTY)
Compare this to a variety of window offerings from single pane to various thermal pane offerings. Deer Valley understands the importance of not just having thermal pane windows, but Low E as well. All our window installations are sealed with silicone caulking and window tape, thereby eliminating undesirable exterior air intrusion. It’s also highly recommended that you compare the Solar Heat Gain and UV ratings listed on the windows. Superior windows have a significant impact with relation to energy efficiency.
FIBERGLASS TUBS AND SHOWERS THROUGHOUT HOME
Deer Valley uses a 48″ master bath shower and a 60″ hall bathtub/shower combination at a minimum. We have several options including ceramic, travertine, and glass. Our largest and greatly popular walk-in shower is 48×96″.
CHINA LAVATORIES IN BATHS W/ OVERFLOW SPILL DRAINS
BRONZE BATH FAUCETS AND SHOWER DOOR IN BATHS
ROLLED EDGE COUNTERTOPS IN KITCHEN AND BATHS
Deer Valley uses post form thickness on their countertops vs. a vertical grade typically used by other manufacturers. Rolled edge countertops by Formica are the choice countertop for water protection and low maintenance. Travertine and glass backsplashes are optioned in a large percentage of our construction. Are you interested in Quartz? Deer Valley offers various optional luxury quartz countertops for your home.
8′ RESIDENTIAL CEILINGS W/ LARGE LINEN CROWN MOLDING THROUGHOUT
Deer Valley also offers 8’6″ and 9′ ceilings.
PERIMETER FLOOR REGISTERS
The perimeter heat system in a Deer Valley home is truly an efficient full perimeter system, using manual J calculations for superior air balance and flow. If you choose overhead ducts, we utilize R-8 ducting in conjunction with mixing boxes, most use R-6. It’s important that your ducts are sealed with mastic and taped to eliminate leakage. With our minimum standard R-30 in the roof, a sealed top plate, and radiant heat barrier roof decking, we know you’ll be very pleased with your utility savings. With a fixed mortgage, but ascending utility rates, our homebuyers can buy more home and spend less over time. Utility rates are expected to continue their increased rates. Over the span of a mortgage, the savings can be huge. We enjoy saving our homebuyers $$$.
36×80 VINYL CLAD 6 PANEL STEEL FRONT DOOR W/ FULL VIEW STORM
Both our front and rear doors are 36×80 vinyl clad with deadbolt locks for increased security. Door jambs are vinyl clad or metal. Compare this to wood jamb doors where maintenance is absolutely necessary.
LARGE PROFILE OFF-WHITE OR PECAN CROWN MOLDING, BASEBOARDS, AND DOOR FACING
40 GALLON DOUBLE ELEMENT ELECTRIC WATER HEATER
Deer Valley uses a 40 gallon water heater at a minimum for quick recovery. Some state code construction requires various sized water heaters. All water heaters have a catch pan base.
10″ RESIDENTIAL EAVES WITH A 7/14″ FIBER CEMENT FASCIA BOARD
Many manufacturers have 6″ eaves with a 5″ metal or hardboard fascia. Deer Valley eaves are vented all the way around with raised heel rafters for better up flow air intake, which improves roof cavity ventilation and extends shingle life.
TORTOISE STAINED TEA GLASS LIGHT FIXTURES
Bedroom lights are all two bulb fixtures completely enclosed with glass. This prevents shadowing/ceiling reflection vs. lesser-used fixtures. Walk-in closets are lighted and switched as well. Deer Valley homes are also wired and braced for ceiling fans in living rooms, family rooms, and all bedrooms as a standard feature.
6 PANEL MORTISED INTERIOR DOORS W/ OIL RUBBED BRONZE DOOR HANDLES
FRIGIDAIRE APPLIANCES STANDARD
OUR VALUED SUPPLY PARTNERS
ENERGY STAR ACCREDITATION
WE COMMIT TO BUILDING SUSTAINABLE, EFFICIENT HOMES FOR A MODERN AMERICA
Heavy duty engineering is often associated with inefficiency, waste, and unnecessary expense, just as a heavy duty truck is expected to have terrible gas mileage. When custom engineering our signature “Heavy Built” manufactured home, the team at Deer Valley committed themselves to not only breaking this trend, but making the Heavy Built brand synonymous with energy efficiency and sustainability.
By making features like Low E Thermal Pane windows, perimeter floor registers, and radiant heat barrier roof decking standard in all Deer Valley homes, we’re able to not only increase the lifespan of your home and minimize the amount of necessary maintenance, but we can save you hundreds or even thousands on your annual utility bills. Our advanced building processes and highly controlled construction planning allows us to deliver on tighter, stronger built homes and enhanced energy efficiency. This is just one of the reasons why Deer Valley homes are not just the best manufactured homes, but the best home value, period.
The staff at C&G mobile homes were awesome! They were very helpful and knowledgeable about what they sell we love our new home.Janet & Steve Williams
When our home burnt down we were at a loss. Having never lived in a mobile home and my husband being a contractor we were reluctant to take this route. During or process of looking at manufactured home we found C&G, my husband was sold with the quality and construction they offered. We have been in our home for 4 months and are completely satisfied with our purchase from C&G.Ann & Bob Roberts
We purchased our retirement home from C&G. Being on a fixed income we were concerned about the energy cost of a manufactured home. The staff at C&G worked with us to ensure our home would be manageable for our budget. Needless to say when our first electric bill came in we were elated that it was 75.00 less than our old home which was the same square foot. Thank you C&GJeff & Becky Fears
What a breath of fresh air, after shopping at several mobile home lots we discovered C&G. What a difference the staff at C&G actually listened to our needs and answered our questions unlike the others that acted like we were bothering them go figure. Long story short we bought our home from C&G and love it. We give C&G an A+ for their professionalism and the quality of homes they offer.Sara & Mitch Mobil